Bearing GNE40-KRRB NKE

DE_:160; TSR rpm:4300; DI_:108; Fw:108; yobi:NU2317ET7; B_:60; DA_:26; mass:6.75; D_a max:167; SBRG:23;

d:1.5000 in; misalignment angle:5 °; bearing type:Radial; D:3.2500 in; inner ring material:Brass; closure type:Open; inner ring width:1.5000 in; outer ring width:1.1250 in; lubrication type:Requires Lubrication; outer ring material:Carbon Steel;

manufacturer upc number:029176427657; housing construction:Split Pillow Block; housing material:Cast Iron; compatible bore diameter:5.1875 in; mounting:Two-Bolt Base;

tang thickness:0.1950 in; material:Carbon Steel; material:Carbon Steel; manufacturer product page:Click here; face diameter:7.4980 in; d:6.3890 in; series:PW; series:PW; outside diameter over tangs:8.6090 in;

material:Carbon Steel; thread size:.586-32; D:1.0000 in; face diameter:0.8130 in; thread direction:Right Hand; manufacturer product page:Click here; lock washer or locking device part number:PW-02; overall nut width:0.3230 in; axial load:8100 lbs; material:Carbon Steel;

D:90mm; Fatigue Load Rating (kN):1.12; Cage Type:Steel; Weight:0.02 KGS; Static Load Rating (kN):21.2; Clearance:Standard; d:55mm; Limiting Speed Rating (r/min):8300; B:18mm; Availability:In Stock;

radial static load capacity:2540 lbf; d:1.2500 in; radial dynamic load capacity:4410 lbf; length through bore:1-29/32 in; series:UGSLF200; replacement bearing:UG206-20; duty type:Standard Duty; seal type:Contact with Flinger; housing material:Cast Iron; expansion type:Non-Expansion Bearin;

DE_:160; TSR rpm:4300; DI_:108; Fw:108; yobi:NU2317ET7; B_:60; DA_:26; mass:6.75; D_a max:167; SBRG:23;

tang thickness:0.1950 in; material:Carbon Steel; material:Carbon Steel; manufacturer product page:Click here; face diameter:7.4980 in; d:6.3890 in; series:PW; series:PW; outside diameter over tangs:8.6090 in;

D:90mm; Fatigue Load Rating (kN):1.12; Cage Type:Steel; Weight:0.02 KGS; Static Load Rating (kN):21.2; Clearance:Standard; d:55mm; Limiting Speed Rating (r/min):8300; B:18mm; Availability:In Stock;

B:1-3/32 in; d:0.5000 in; snap ring included:Without Snap Ring; maximum rpm:6140 RPM; outer ring width:0.4724 in; bore type:Round; cage material:Nylon; finish/coating:Uncoated; inner ring width:1.0938 in; D:1.5748 in;

compatible bore diameter:4 in; manufacturer product page:Click here; end cap type:Closed End Cap; manufacturer upc number:793699248500; series:200; material:Steel; material:Steel;

manufacturer upc number:029176427657; housing construction:Split Pillow Block; housing material:Cast Iron; compatible bore diameter:5.1875 in; mounting:Two-Bolt Base;